Enhancement Details
Select one or more of the following search criteria to get information on particular product enhancements.
Items found: 14
If you don't have the codec already, you should be prompted to install it. If not, you can download it here.
-
Predefine Ejector Pins with Layout Curve
You can create a layout curve in a part model for ejector pins. When necessary, the ejector pins can be automatically assembled to the mold base.
-
Colors Applied to Mold Base Assembly
The colors of the cut quilt for Library Components are automatically applied to the contact surfaces on the mold base assembly.
-
Select Multiple Surfaces for Coloring
You can select multiple surfaces using a selection box and then change the color using the predefined technology colors.
-
New Waterline Assembly Model Containing Solid Features
In addition to creating a waterline model based on copied surfaces of cooling channels, you can create the waterlines as solid representations.
-
Suppressing Ejector Pin Hole Features
You can suppress all ejector pin hole features on a molding part when calculating the clamping force.
-
Enhanced Sliders in Mold Base Opening Simulation
The slider moves along the pull direction when using the EMX Mold Base Opening Simulation.
-
New Shortcut Menu Commands for EMX Components
You can modify or remove EMX components using commands on the shortcut menu.
-
Assembling Multiple Components Using a Reference Pattern
You can add a customized reference pattern to the Mold Base Definition dialog box and use it to assemble multiple components.
-
New Runner Library
Commonly-used runners are available in the EMX library.
-
New Gate Library
Commonly-used gates are available in the EMX library.
-
Support for Trail Files
You can restore a previous session with a trail file.
-
New Intelligent Waterline Creation
You can add waterlines to a mold assembly by drawing layout curves in the graphics window and then editing or deleting each waterline.
-
Maintaining Instance Data with Microsoft Excel
You can use Microsoft Excel to edit and add data to instances in the Component Editor dialog box.
-
Enhanced Balloon Placement in Bill of Materials (BOM)
The sequence of components is updated automatically when you open the Bill of Materials dialog box.