Select one or more of the following search criteria to get information on particular product enhancements.
Items found: 18
If you don't have the codec already, you should be prompted to install it. If not, you can download it here.
Dynamic Analysis Calculations Are Faster
Calculating stresses in Dynamic Analyses is faster.
Temperature History as Load of Nonlinear Static Analysis
You can use the temperatures calculated at the output steps of a Transient Thermal Analysis, as a Temperature Load History of a Nonlinear Static Analysis.
Defining Heat Loads that Move
You can define heat loads that move in a transient thermal analysis.
Preloads for Solid Parts
You can define preloads on parts.
Prismatic AutoGEM Control
You can automatically generate wedge and brick elements in prismatic regions of your model.
Thin Solid AutoGEM Control
You can automatically generate wedge and brick elements in thin regions of your model.
Animating the Results of Dynamic Frequency Analysis
You can animate the cyclical motion of models from a dynamic frequency analysis.
Defining Plasticity for Large Strains
You can define elasto-plastic materials that can undergo large strains.
Additional Boundary Conditions for Thermal
You can define thermal analysis models with radiation and with convection conditions that depend on temperature.
Von Mises Stress for Dynamic Random
You clan compute von Mises stress for dynamic random analyses.
Improvements to Base Excitation
You can rotate the base.
You can define time-varying loads and use them in nonlinear static and steady state thermal analyses.
Nonlinear Stiffness for Springs
You can analyze models containing springs when the springs have a stiffness that is dependent on their stretch.
Enforced Displacements Relative to a UCS with Large Deformations
You can have analyses with large deformations for models that have enforced displacements.
Large Deformation Analyses of Axisymmetric Models
Run analyses with large deformations for axisymmetric models.
Conductivity that is Dependent on Temperature
For thermal analysis, you can define a material with conductivity that depends on temperature.
You can create a regular structured mesh of solid or shell elements.
Running Static Analysis with Contact and Large Deformations
You can define and run static analysis with both contact and large deformations.